Named IMD-H family
The official product table identifies the model family as IMD-H and lists specification codes from 4008 to 6030. This record retains the family name; it does not invent a combined model suffix. The source describes frequency selection and dual-channel metal detection.
Match aperture, loading and reject execution
The official IMD-H table lists belt widths of 360, 460 and 560 mm for the 400, 500 and 600 mm detection-width groups. Listed loading capacities are respectively up to 10, 50 and 100 kg. These are configuration limits, checked on 7 October 2026, not conveyor throughput or detection performance for every food.
The table lists storage for 100 product types and IP54/IP65 entries; obtain the offered execution rather than assuming both protection ratings or a validated washdown procedure. Retain the source’s test-sample-only sensitivity warning and confirm any automatic rejecter, controls and reject verification with representative product.
Specify the aperture and actual food
Select the offered aperture, belt, loading and food conditions with the supplier. The published sensitivity values use only the test sample on the belt; actual performance depends on food, working conditions and speed. The table lists alarm and belt stopping with an optional rejecter. Agree automatic reject handling explicitly; do not assume it is included.
Agree the actual inspection trial
Define the real food, package, conveyor spacing and operating conditions. Agree reference samples, measurement or detection criteria, rejected-product handling and records before comparing offers. Catalogue maxima and test-sample-only results do not establish a production-line guarantee. Keep physical-contaminant inspection separate from microbial or shelf-life validation.
Supplier and inspection alternatives
Official references
Official pages checked on 5 October 2026. Supplier statements are attributed catalogue information; confirm the supplied configuration and representative product trials.
Contact Techik about the offered equipment configuration and representative product trials
The official contact route was rechecked on 7 October 2026. Other equipment facts retain their recorded source dates. Confirm regional supply, options and the acceptance basis directly with the supplier.
Application context and process planning
The following food and process routes are already associated with this record. Use them to define the material, upstream and downstream duties, and trial requirements; a directory association is not a guarantee that every configuration can handle every application.