Published equipment facts
- Manufacturer
- JEROS
- Wash area W x H x D
- 1340 x 870 x 800 mm
- Wash tank
- 165 litres
- Rinse tank
- 31 litres
- Published programme times
- 2, 4 and 6 minutes; not complete handling cycles
The model page and linked UK sheet describe example loads, not a production-line rate. Confirm basket spacing and the offered configuration. Published outer widths differ between tables; request an approved installation drawing rather than using these tables as a site layout.
Check the load example against the offered basket
The official model page lists one 80 L mixer bowl in its product-feature load examples, while its lower capacity table and the linked UK specification sheet list two. The outer-width entries also differ between the published tables. These source differences were checked on 7 October 2026 and remain unresolved; neither load count nor width is selected as a guaranteed supplied value.
The UK sheet describes an integrated mixer tap and air-blowing equipment as options, with data logging listed separately as an optional extra. Identify the actual basket, bowl geometry, cleaning arrangement and installed options in a dated proposal and drawing. Example loads and programme times do not establish complete handling throughput or a validated cleaning result.
Questions to settle before a quotation
- Which actual removable parts fit the basket and agreed loading pattern?
- How will preparation, loading, washing, unloading and drying affect accepted throughput?
- Is data logging included, and which measurements and records are delivered?
Ask bidders to state trial material, accepted output, losses, utilities, changeover time and scope exclusions in writing. Compare the offered configuration using the same recipe and acceptance criteria.
Equipment trial & quotation guideAcceptance boundaries
Data logging is an option in the linked sheet, not an assumed standard feature. Web and document savings claims differ and are not repeated as guarantees. Hot-water rinsing and a programme time do not establish universal microbiological or allergen acceptance.
Manufacturer-linked demonstration
Watch the JEROS 8150 demonstration on YouTube
The official model page links this film. It is supplementary presentation material, not an acceptance test of your parts or evidence of every offered option.
Category & manufacturer
Utensil & removable-part washers
Compare the equipment duty.
JEROS
Manufacturer evidence and enquiry route.
Common questions
Are price and stock confirmed?
Request a dated regional offer stating the model, options and service scope.
Is cleaning the same as disinfection or sterilization?
Keep these acceptance objectives separate. Require evidence for the specified duty rather than inferring the result from equipment names or construction materials.
Sources & record scope
Official manufacturer pages checked on 4 October 2026. Product facts are attributed; route maps and buyer questions are editorial planning aids. Confirm the offered configuration with the manufacturer.
Contact JEROS about the offered equipment configuration and representative product trials
The official contact route was rechecked on 7 October 2026. Other equipment facts retain their recorded source dates. Confirm regional supply, options and the acceptance basis directly with the supplier.
Application context and process planning
The following food and process routes are already associated with this record. Use them to define the material, upstream and downstream duties, and trial requirements; a directory association is not a guarantee that every configuration can handle every application.