Identify the incoming material first
Is the feed a loose storage agglomerate, a durable granule, a raw solid piece or a wet granule? Record identity, lot, moisture and sieve distribution. Define the intended outcome before choosing equipment. This is editorial planning guidance, not a validated recipe or proof that every food powder requires size reduction.
Choose breaking, sizing or a separate milling duty
If the objective is to disperse loose agglomerates while preserving primary particles, seek direct evidence for that lump-breaking configuration. If the objective is to reduce and regularise existing granules, investigate controlled sizing. Raw solids or a fine-powder target require a separate milling study. The KZL model 100 record is the sizing candidate here. The separate Doing LB-150x150 record is an indicative lump-breaking candidate; its exact food configuration and a named food trial remain unverified.
Locate sizing and screening by trial
Agree upstream unloading, feed control, the sizing chamber, screening location and the accepted-material destination. Screening before or after sizing serves different purposes; do not prescribe a universal sequence. Define retained-material identity, permitted rework, receiver readiness and how a screen or sizing fault stops feed. Wet and dry trials stay separate.
Connect without implying proven application
- Food granule sizing mills
- Yutong KZL series — model 100
- Food lump breaking and granule sizing acceptance
- Food powder screening before ingredient feeding
- Food bag opening and bulk-bag unloading equipment
- Food vacuum conveyors
- Ingredient weighing and dosing
- Dry seasoning processing
The dry-seasoning route is an editorial planning connection. It does not demonstrate that model 100 has passed a particular seasoning recipe trial.
Official sources and record scope
Official manufacturer pages and the original model table checked on 6 October 2026. Published descriptions support identity and stated duty; they are not an independent registration, factory, food-contact or material-trial audit.
LB lump-breaking candidate and configuration boundaries
LB-150x150 is a source-attributed indicative lump-breaking candidate, while KZL series model 100 remains the separate controlled-sizing reference. Impact, shear and a sieve do not establish zero particle damage. Confirm blade type, moisture, lump hardness, sieve and an accepted food trial before choosing the duty. Official LB food-use and indicative model reference.